The company has a strong technical team of production,

our production staff from a professional education, training

of fitter fitter and assembly electrician and a professional physical and chemical testers

Sales Hotline:


BYCC-01 Automated blood bag connecting system instructions
First, the safety information
1, the basic safety requirements
This equipment complies with GB4793.1-2007 "General Requirements for Safety Requirements of Electrical Equipment for Measurement, Control and Laboratory Use, Part 1" and the safety requirements of the latest technologies. This equipment has been tested under safe working conditions and for the purpose of keeping the equipment in compliance with the safety specifications, be sure to read and comply with the requirements outlined in this operator's manual.
2, equipment range
◆ This equipment is only suitable for applying the aseptic technique to connect the plasma bag with the virus-inactivated blood bag in the 100-stage decontamination table. It is strictly forbidden to use for other purposes.
◆ This device is only applicable to the specified size of the plasma bag.
3, the following is strictly prohibited
◆ Equipment is prohibited in the narcotic, flammable and explosive gas environment to use in case of explosion.
◆ Equipment is forbidden to be disassembled by non-professionals for maintenance, so as to avoid short circuit or electric shock accidents.
◆ It is forbidden to put any part of the body and sundries inside the machine while working, so as to avoid mechanical damage.
◆ When the equipment is working, it is forbidden to cover any items on the machine.
◆ Do not use the power supply that does not match the voltage specified by the equipment or use a damaged power plug and an unstable power outlet to avoid fire or electric shock.
◆ Do not use the device in humid environment to avoid electric shock or short circuit caused fire accident.
4, equipment use precautions
◆ The use of equipment should follow the medical regulations, operating procedures and health measures to prevent infection.
◆ Unplug the needle cap and the cut blood bag cap should be placed in the designated medical waste containers, and in accordance with local regulations for disposal.
◆ It is recommended that you use the original parts provided by our company to avoid damaging the machine.
◆ equipment belongs to ordinary non-liquid into the device function, please note that the machine waterproof.
◆ When the device is moved from a warm place to a cold place or a warm place from a cold place, please leave the machine off for more than 2 hours and then turn it on again due to the temperature difference.
◆ The equipment is only for the qualified personnel after training. The untrained operator may not take the post. When the operator leaves the post, please turn off the machine to avoid the accident caused by non-professional operation.
◆ The machine should be stored in a dry room.
5, the disinfection of the machine and cleaning
◆ The use of equipment should be disinfected with UV lamp for more than 2 hours before use.
◆ If the blade comes in contact with blood or plasma, wipe it off with a neutral detergent or anhydrous alcohol.
◆ If the surface of the machine comes in contact with blood or plasma, use neutral detergent or anhydrous alcohol to wipe disinfection.
◆ Inside the machine to avoid falling into foreign objects. If foreign matter falls into, it should be cleaned up promptly.

Second, equipment introduction
1, equipment appearance and components

Figure 1 product appearance
1, the display   2, needle cap leakage   3, glass cover   4, the power switch   5, the power cord socket   6, network cable jack   7, USB jack   8, turntable
2, technical parameters
Name Specification
Rated power AC AC 220V / 50Hz
Rated power 450W
Working condition Can work continuously
Working environment -10℃~40℃
Working environment humidity ≤90%
Dimensions 620mm X520mm X 450mm
Machine weight 35kg

Third, equipment display and operating instructions
1, boot
Place the product on the decontamination table, connect the power cord to the power jack on the left side of the product, insert the codec into the USB port, connect the network cable to the network cable port and press the left power button.

Figure 2 boot
2, boot interface
Figure 3 boot login screen
3, login
After powering on, as shown in Figure 3, the computer displays the login interface at the upper right of the front of the product. After logging in for the first time, you need to register the user information, enter the administrator information, set the administrator user name and password, and then set the administrator mode and management Member open user settings Enter the user name and password, add, delete, modify other user information.
The operator will enter the user name and password, touch-click login.

4, UV lamp disinfection
Click login, enter initialization interface as follows:
Figure 4 Initialization interface
Click "UV lamp open", the product inside the UV light to open. UV light irradiation disinfection will be automatically shut down after 5 minutes, while the folder closed, the internal turntable low-speed rotation.
Note: During UV lamp irradiation, do not open the blue glass cover, do not touch the top of the product turntable, the operator leaves the product more than 1m distance to prevent leakage of UV reflection.

5, initialization
UV disinfection is completed, remove the blue glass cover, open the right needle cap leakage port, as shown in Figure 5:
Figure 5 Pre-initialization state
Click the "initialization" button, the product automatically enter the initialization operation.

66, user interface
Click the "Initialize" button, the interface into the user interface, as shown in Figure 6:
Figure 6 during the initialization process
At this point the button can not be operated, wait for the product to be automatically initialized before operation.
Attention: During the initialization process, the movement of the internal body of the product and the rotation of the turntable will be normal. At this time, operators should not touch the internal components of the turntable and other products to avoid damage to the machine and personnel.
After initialization, the interface shown in Figure 7:

Figure 7 user interface
Internal turntable product alignment, shown in Figure 8:

Figure 8 turntable position
7, into the inactivated bag and plasma bag
Inactivated bags and plasma bags shown in Figure 9:
Figure 9 inactivated bag and plasma bag
Winding the inactivated bag to the condition as shown in Figure 9, opening the top turntable clip of the product, putting it in the inactivation bag and closing the clip, as shown in Figure 10:
Figure 10 inactivated bags into the tray
Will inactivated bag needle fixed card stuck in the left hand groove, as shown in Figure 11:
Figure 11 needle fixed
As shown in Figure 12, click on the interface "on the closed", the upper folder automatically closed, closed as shown in Figure 12:
Figure 12 Click on the "closed"
Use the hand-held scanner to scan the barcode on the plasma bag, place the plasma bag in the slot under the clip, and insert the piercing cap into the slot in the clip, as shown in Figure 13:
Figure 13 Close the upper hand grip and place in the plasma bag
Click on the "closed" under the folder automatically closed, as shown in Figure 14:
Figure 14 closed under the folder

Note: Needle placed in the upper hand groove, the need to rely on tight groove alignment; plasma bag puncture the bottom edge of the hat should be close to the plane under the folder.

8, "go to the next one"
Click the "Go to Next" button, the turntable will automatically move to the next station, repeat the process "7" into the deactivation bag and plasma bag, then repeat the process "8".
9, remove the puncture good inactivated bags and plasma bags
The first plasma bag and inactivated bag into the bag after cutting, pulling cap, puncture process, returned to the operator station, has been automatically punctured, as shown in Figure 15:
Figure 15 puncture after taking over the product status
Remove the punctured take-off deactivation bag and plasma bag, as shown in Figure 16, and repeat "Process 7, 8, 9" until completion of the required puncture takeover task.
Figure 16 After the puncture took over the inactivation bag and plasma bag

Fourth, other instructions
1, product packaging
After receiving the equipment, please carefully open the package, and carefully check the machine for any damage, such as found during transport damage, please notify me or your local dealer.
2, environmental requirements
Equipment must be placed on a level solid panel and should not be significantly tilted to either side. The use of environmental conditions to comply with the provisions of this manual. The machine can not be placed in the environment of flammable and explosive dangerous goods, there must be fire prevention facilities around.
3, transport
Heavy machine, the application of flatbed handling. Machine handling, the maximum body inclination can not exceed 15 degrees, but can not be inverted or horizontal handling. In the transport process, to prevent bump and intense vibration, rain and water immersion.
4, the power connection
The working power of the machine is 220V / 50Hz, plug the socket end of the power cord into the power socket on the back of the machine, plug the power cord into the power socket, and the machine can work. (Note: the power outlet grounding must be grounded)
5, maintenance and cleaning
Machine platform and accessories can be neutral detergent or anhydrous alcohol scrub. When servicing the machine, the machine should be thoroughly sanitized and disinfected to prevent harmful or infectious substances from endangering the health of the service personnel.

Five, troubleshooting table
Symptoms Failure reason analysis Solution
Can not boot 1, the power outlet is damaged
2, the power cord is damaged
3, fuse blown
1, for the power outlet
2, for the power cord
3, for the fuse (with a spare fuse)
Unable to cut off the plasma bag cap Blade aging, wear and tear 1, the system automatically detects not cut off, the next step manually into the plasma bag operation, close the upper and lower chuck, directly into the next, to exit the uncut plasma bag.
2, replace the blade
Unable to remove the needle cap Worn hands, aging 1, the system automatically detects the needle cap is not removed, the next step is not manually into the plasma bag operation, close the upper and lower collet directly into the next, exit the needle cap is not pulled out.
2, maintenance pin hatched hands, replace the aging parts
Note: If you take the above measures can not solve the problem, please contact our after-sales service department in time.